Choose what you need the hardware to do, then answer only the questions relevant to that application. The finder narrows the Trailer Parts Direct fastener range by function, mounting method, retention style, material, environment and available variants.
1. What do you need the hardware to do?
Start with the job you need the hardware to perform rather than the product name.
2. How would you like it to fasten?
Choose the action that best describes the closure.
3. Do you require a locking or padlock-compatible option?
Keyed locking, padlock compatibility and simple retention clips are treated separately.
4. How will the fastener be mounted?
Choose the mounting method you plan to use.
5. Do you require spring-loaded tension or compliance?
Useful where the fastener needs to maintain tension as panels, seals or roof sections move slightly.
6. What is the application?
This helps separate general fasteners from specialised roof-clamp and canopy-latch products.
3. How will the Anti Luce fastener be installed?
Choose threaded or weld-on. If unsure, keep both options.
4. If threaded, which thread length?
Choose the existing or preferred mounting style.
4. Spring bolt size
Choose a nominal size if known. Unsure keeps the available spring-bolt range visible.
2. Preferred door holdback style
Choose the style that best matches how you want the door or panel held open.
2. Does the tie-down need to sit recessed / flush?
Choose Yes for a recessed floor or panel mounting point.
3. Do you specifically require a product with a published numeric rating?
Only explicit catalogue ratings are used. “Heavy Duty” is not treated as a load rating.
2. Are you installing new anchor track or adding to existing track?
This separates complete track systems from compatible fittings and accessories.
3. Required track length
Choose the closest catalogue track length.
3. What do you need for the existing track?
Choose the fitting or accessory function.
2. What type of removable restraint do you prefer?
If unsure, the finder will keep several restraint types available.
3. Do you require hooks?
This helps separate plain straps from S-hook versions where the catalogue specifies them.
4. Required strap length
Only published lengths are used as hard filters.
2. Are you installing channel or looking for a fitting / accessory?
Channel is treated as the primary system; nuts, eyelets, rubber and end caps are components.
3. Unistrut profile
Choose the channel profile if known.
3. What Unistrut component do you need?
Choose the component function.
4. Channel nut type
Choose spring-loaded or no-spring if known.
5. Thread size
The spring-loaded channel nut is currently verified in M6 and M8.
Installation environment
Stainless with no published grade is classified as 304 stainless. 316 is only identified where TPD explicitly states 316.
Choose a function to begin.Controlled from the audited Fastener Master Matrix
Before orderingCheck the fastener dimensions, mounting method, material, mounting surface, required clearances and compatibility with your application against the individual product drawing. Product descriptions such as “heavy duty” do not represent a verified load rating unless a specific load capacity is stated. This finder helps narrow the Trailer Parts Direct fastener range and does not calculate structural or load capacity.
