100L Trailer Water Tank (Australian Made)
AUSTRALIAN MADE FOR AUSTRALIAN CONDITIONS
$400.00
or 4 payments of $100.00 with Afterpay
This 100L tank is ideal for serious water needs on long tours. Made from food-safe polyethylene in Australia, and commonly fitted under trailers or caravans for full offroad capability.
- Australian Roto-Moulded Plastic product
- Each tank is built from food-grade polyethylene—safe to drink from and free of unusual taste (any odd flavour likely comes from your hose, not the tank itself).
- Black in colour
- Made with an extremely tough 5-8mm thick walling
Drilling extra holes or increasing the size of existing holes can cause the tank to leak. We recommend using only the holes pre-drilled in the tank for mounting.
* Please Note: Water tanks may arrive with scratches. This is not a defect or from mishandling / transit damage. This is from wear in the water tank mould and the tanks also incur scratches when being pulled from the oven and out of their mould.
* Please Note: Water tank mounting holes are drilled by hand and may differ in location to dimensional image displayed.
Please fill in the fields below with the shipping destination details in order to calculate the shipping cost.
*** Please Note: Some Areas within Australia may incur additional freight charges. Customer service will contact your before your order is shipped. ***
—
Water tanks for your camper trailer, caravan, motor home, 4×4 and so on. These units are used and trusted by some of Australia’s largest and most respected tough and hard wearing caravans and camper trailers builders. These tanks are roto mouded right here in Brisbane. They are made with a tough poly wall that fluctuates between 5mm – 8mm during manufacturing. This thick walling means you don’t require any protective plates to guard your tank from punctures.
Drilling extra holes or increasing the size of existing holes can cause the tank to leak. We recommend using only the holes pre-drilled in the tank for mounting.
Outer Dimensions:
1200mm Long x 700mm Wide x 180mm Deep
Thread Size:
Inlet – 1” BSP
Outlet – ½” BSP
Breather – ¼” BSP
Water Tank Features: Australian Roto-Molded Product
Black in colour
Made with an extremely tough 5-8mm thick walling around unit
If you are after a water tank you might also be interested in our PVC Hand Pumps and water filler caps.
SPECIFICATIONS
SKU: RVC100
GTIN: 9352016006233
Brand: Dunn & Watson Pty Ltd
Commonly used in: Camper Trailers, Caravans, Under Ute Trays
Product Weight: 13.95kg
Only logged in customers who have purchased this product may leave a review.
FAQs
Can I drink this water?
Yes these tanks are water potable, this means water from this tank is safe to drink.
Why is there flavour in my water?
You can search online for various methods to remove the plastic taste from your water.
Do these tanks have a baffle?
No.
Can I run a water level indicator in these tanks?
Yes.
The pilot holes for install are smaller than my mounting bolts, can I drill out holes to run larger fixings?
No. Increasing the hole diameter on the mounting flange can cause the tank to leak.
How tight do run fixings into tank mounting flange?
Fittings should be firm but it is important they aren't over tight and gauge or crack mounting flange. This may cause the tank to leak.
What are these tanks made from?
The material of these tanks is LLDPE (Linear Low Density Polyethylene). These tanks are Food Grade and BPA Free.
You may also like…
Caravan / Camper Trailer Tank
or 4 payments of $25.00 with Afterpay
Reviews
There are no reviews yet.