316SS Gas Strut Bracket (Large Mounting Plate)

Add to wishlist
316 Stainless Steel Gas Strut Bracket Large Mounting Plate 3
316 Stainless Steel Gas Strut Bracket Large Mounting Plate 4
316 Stainless Steel Gas Strut Bracket Large Mounting Plate 2
316 Stainless Steel Gas Strut Bracket Large Mounting Plate 1
Dunn And Watson Gas Strut Bracket Heavy Duty Angle Plate Dimensions
No

$12.50

Buy Now, Pay Later options available

or 4 payments of $3.13 with Afterpay

316 Stainless Steel Gas Strut Angle Bracket with Large Mounting Plate – 90° Install with 10mm Ball Stud for 4WD, Campers & Trailers

 

  • Manufactured from marine-grade 316 stainless steel for superior corrosion resistance

  • Reinforced angle bracket design with large mounting plate for extra stability

  • Supports 90-degree gas strut installations from flat surfaces

  • Suits all Dunn & Watson 316 Stainless Steel Gas Struts in lengths 195mm, 316mm, 430mm, 500mm, 595mm, 700mm and 816mm

  • Ideal for camper trailer lids, canopy hatches, toolbox lids, and caravan doors

  • Built tough for off-road, coastal, and high-moisture environments

Front Fixing L Handle - 13

259 in stock (Need more? You can order more and we'll confirm timing for the extra quantity)

Recommended products

Gas Strut 430mm - 5
Add to wishlist

Gas Struts

Gas Strut 500mm

$21.00

or 4 payments of $5.25 with Afterpay

Select options
This product has multiple variants. The options may be chosen on the product page
Dunn And Watson 700mm 316 Stainless Steel Gas Struts
Add to wishlist

316 Stainless Steel Gas Struts

Gas Strut 816mm – 316 Stainless Steel

$180.00

or 4 payments of $45.00 with Afterpay

Select options
This product has multiple variants. The options may be chosen on the product page
316 Stainless Steel 10mm Stud Gas Strut Bracket ΓÇô Internal Mount Flat Long Reach 3
Add to wishlist

316 Stainless Brackets for 6X15 & 8X18 Gas Struts

316SS 10mm Stud Gas Strut Bracket – Internal Mount (Flat/Long Reach)

$10.00

or 4 payments of $2.50 with Afterpay

Add to cart
Dunn & Watson 316 Stainless Steel 501mm Gas Struts 2
Add to wishlist

316 Stainless Steel Gas Struts

Gas Strut 500mm – 316 Stainless Steel

$120.00

or 4 payments of $30.00 with Afterpay

Select options
This product has multiple variants. The options may be chosen on the product page
Calculate shipping price

Please fill in the fields below with the shipping destination details in order to calculate the shipping cost.

VeriSign
Credit Card 2
AfterPay
PayPal
Add to wishlist

Built to handle the harshest environments, the Dunn & Watson 316 Stainless Steel Gas Strut Angle Bracket with Large Mounting Plate is the ideal solution for heavy-duty, 90-degree gas strut installations. Whether you’re outfitting a 4WD canopy, camper trailer, or toolbox, this bracket delivers maximum strength and corrosion resistance, even in coastal or marine conditions.

The oversized base plate provides added surface area for secure mounting, while compatibility with all Dunn & Watson 316 Stainless Steel Gas Struts ensures flexibility across your gas strut setup. Suitable for use with Dunn & Watson gas struts up to 816mm, this bracket is designed to offer reliable, long-term performance where strength and stability matter most.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Not sure this is the right option?

Use the Gas Strut Replacement Finder to compare the relevant specifications before ordering.

Open the dedicated finder page
Use the finder on this page

Gas Strut Replacement Finder

Identify matching Trailer Parts Direct gas struts from the specifications of the gas strut you are replacing. This tool is for like-for-like replacement identification only.

Replacement identification only. This finder does not calculate, design or specify gas struts for new installations and must not be used to increase or decrease the Newton rating of an existing installation.

1. Are you replacing an existing gas strut, or selecting gas struts for a new installation?

Gas Strut Safety - Read Before Removal or Installation

  • Always independently support the lid, hatch, door or panel before removing or installing a gas strut. Never work beneath a panel supported only by gas struts.
  • Gas struts contain pressurised gas and stored energy. Do not drill, puncture, cut, crush, weld, open or deliberately damage a pressurised gas strut. Follow the manufacturer's disposal instructions.
  • Do not expose gas struts to excessive heat, flame or conditions outside the manufacturer's specified operating limits.
  • Do not install or reuse a strut that is bent, dented, badly corroded, leaking, mechanically modified or otherwise damaged.
  • Avoid scratching, painting, greasing, contaminating or damaging the piston rod.
  • Do not subject the strut to side-loading, bending or misalignment. Existing mounting points and fittings must allow the strut to move freely without binding.
  • Do not exceed the intended stroke or use the strut as a mechanical end stop unless the original application was designed that way.
  • Keep hands and body parts clear of hinges, brackets, pinch points and moving panels during removal and installation.
  • If the existing specifications cannot be positively identified, the replacement does not match, or you are unsure about safe removal or installation, stop and seek professional assistance.
Catalogue dimensions and availability can change. This finder uses the current working range established for Trailer Parts Direct and the specifications entered by the customer.
Secret Link