Gas Strut 595mm – 316 Stainless Steel

Add to wishlist
Dunn & Watson 316 Stainless Steel 501mm Gas Struts 2
Dunn & Watson 316 Stainless Steel 501mm Gas Struts 1
Dunn & Watson 316 Stainless Steel 501mm Gas Struts 3
Dunn & Watson 316 Stainless Steel 10mm Ball Studs And Nuts 2
Stainless Steel Gas Struts On A Marine Hatch
Stainless Steel Gas Struts On A RTT
Stainless Steel Gas Struts On A Hatch
Dunn & Watson Gas Struts Dimensions
Gas Strut 195mm - 316 Stainless Steel - 1
No
SKU: GS0143-GS0149  ·  Weight: 1 kg

$130.00

Buy Now, Pay Later options available

or 4 payments of $32.50 with Afterpay

595mm Gas Struts – 316 Stainless Steel

Dunn & Watson’s 595mm gas struts in 316 stainless steel provide smooth, reliable operation for heavy-duty canopy lids, underbody doors, and marine hatches where strength and corrosion resistance are critical.

Key Features:

  • Constructed from premium-grade 316 stainless steel throughout

  • Supplied with 2x stainless steel ball studs and 2x mounting nuts

  • Full extension length of 595mm eye-to-eye

  • Tested to over 50,000 cycles for extended operational life

  • Industry-leading L-shaped “Skeleton Oil Seal” prevents gas leakage

  • Enhanced oil and cylinder capacity ensures consistent strut pressure

  • Pressurized with 99.9999% pure nitrogen gas to avoid component degradation

4x4 Upright Fridge Door Organiser - 1

Recommended products

Gas Strut 430mm - 5
Add to wishlist

Gas Struts

Gas Strut 430mm

$20.00

or 4 payments of $5.00 with Afterpay

Select options
This product has multiple variants. The options may be chosen on the product page
Calculate shipping price

Please fill in the fields below with the shipping destination details in order to calculate the shipping cost.

Add to wishlist

TRAILER PARTS DIRECT

Gas Strut Replacement Finder

Identify like-for-like replacements using the specifications on an existing gas strut.

Standard Gas Struts | 316 Stainless Steel Gas Struts | Gas Strut Fittings

START FINDING NOW

Gas Strut Replacement Finder

Identify matching Trailer Parts Direct gas struts from the specifications of the gas strut you are replacing. This tool is for like-for-like replacement identification only.

Replacement identification only. This finder does not calculate, design or specify gas struts for new installations and must not be used to increase or decrease the Newton rating of an existing installation.

1. Are you replacing an existing gas strut, or selecting gas struts for a new installation?

Gas Strut Safety - Read Before Removal or Installation

  • Always independently support the lid, hatch, door or panel before removing or installing a gas strut. Never work beneath a panel supported only by gas struts.
  • Gas struts contain pressurised gas and stored energy. Do not drill, puncture, cut, crush, weld, open or deliberately damage a pressurised gas strut. Follow the manufacturer's disposal instructions.
  • Do not expose gas struts to excessive heat, flame or conditions outside the manufacturer's specified operating limits.
  • Do not install or reuse a strut that is bent, dented, badly corroded, leaking, mechanically modified or otherwise damaged.
  • Avoid scratching, painting, greasing, contaminating or damaging the piston rod.
  • Do not subject the strut to side-loading, bending or misalignment. Existing mounting points and fittings must allow the strut to move freely without binding.
  • Do not exceed the intended stroke or use the strut as a mechanical end stop unless the original application was designed that way.
  • Keep hands and body parts clear of hinges, brackets, pinch points and moving panels during removal and installation.
  • If the existing specifications cannot be positively identified, the replacement does not match, or you are unsure about safe removal or installation, stop and seek professional assistance.
Catalogue dimensions and availability can change. This finder uses the current working range established for Trailer Parts Direct and the specifications entered by the customer.
Gas Strut Replacement Finder hardware

595mm Gas Struts – High-End Lift for Oversized Panels
With a longer stroke and robust design, the 595mm Dunn & Watson gas strut provides the muscle needed for large canopy lids and toolboxes. Made from 316 stainless steel and tested for 50,000 cycles, it’s built to thrive in the harshest Australian conditions.

  • Reinforced Skeleton Seal Technology
    Prevents gas leaks, keeps out contaminants, and improves longevity.

  • Purity-Focused Nitrogen Charge
    99.9999% nitrogen prevents corrosion and keeps the strut working smoothly.

  • Oversized Internal Build
    Increased oil and cylinder capacity for enhanced thermal performance and durability.

Perfect for tradies, 4WDers, and marine users who need dependable support.

Dunn & Watson Gas Struts Dimensions
Gas Strut 195mm - 316 Stainless Steel - 1

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Secret Link