Gas Strut 700mm – 316 Stainless Steel

Add to wishlist
Dunn And Watson 700mm 316 Stainless Steel Gas Struts
Dunn & Watson 316 Stainless Steel 501mm Gas Struts 3
Dunn & Watson 316 Stainless Steel 10mm Ball Studs And Nuts 2
Stainless Steel Gas Struts On A RTT
Stainless Steel Gas Struts On A Marine Hatch
Stainless Steel Gas Struts On A Hatch
Dunn & Watson Gas Struts Dimensions
Gas Strut 195mm - 316 Stainless Steel - 1
No
SKU: GS0150-GS0161  ·  Weight: 1 kg

$170.00

Buy Now, Pay Later options available

or 4 payments of $42.50 with Afterpay

700mm Gas Struts – 316 Stainless Steel

Designed for larger canopy doors and high-load applications, Dunn & Watson’s 700mm 316 stainless steel gas struts deliver exceptional lift support and durability in the harshest Australian conditions.

Key Features:

  • Full 316 stainless steel construction for marine and outdoor use

  • Includes 2x ball studs and 2x nuts made from 316 stainless steel

  • Extended eye-to-eye measurement: 700mm

  • Rated for 50,000+ operational cycles

  • L-shaped “Skeleton Oil Seal” technology for long-term gas sealing

  • Larger cylinder and increased oil volume for enhanced performance

  • Filled with ultra-pure 99.9999% nitrogen for optimal longevity

4x4 Upright Fridge Door Organiser - 1

Recommended products

Gas Strut Angle Bracket - 2
Add to wishlist

Gas Struts

Gas Strut Angle Bracket

$5.00

or 4 payments of $1.25 with Afterpay

Add to cart
Calculate shipping price

Please fill in the fields below with the shipping destination details in order to calculate the shipping cost.

Add to wishlist

TRAILER PARTS DIRECT

Gas Strut Replacement Finder

Identify like-for-like replacements using the specifications on an existing gas strut.

Standard Gas Struts | 316 Stainless Steel Gas Struts | Gas Strut Fittings

START FINDING NOW

Gas Strut Replacement Finder

Identify matching Trailer Parts Direct gas struts from the specifications of the gas strut you are replacing. This tool is for like-for-like replacement identification only.

Replacement identification only. This finder does not calculate, design or specify gas struts for new installations and must not be used to increase or decrease the Newton rating of an existing installation.

1. Are you replacing an existing gas strut, or selecting gas struts for a new installation?

Gas Strut Safety - Read Before Removal or Installation

  • Always independently support the lid, hatch, door or panel before removing or installing a gas strut. Never work beneath a panel supported only by gas struts.
  • Gas struts contain pressurised gas and stored energy. Do not drill, puncture, cut, crush, weld, open or deliberately damage a pressurised gas strut. Follow the manufacturer's disposal instructions.
  • Do not expose gas struts to excessive heat, flame or conditions outside the manufacturer's specified operating limits.
  • Do not install or reuse a strut that is bent, dented, badly corroded, leaking, mechanically modified or otherwise damaged.
  • Avoid scratching, painting, greasing, contaminating or damaging the piston rod.
  • Do not subject the strut to side-loading, bending or misalignment. Existing mounting points and fittings must allow the strut to move freely without binding.
  • Do not exceed the intended stroke or use the strut as a mechanical end stop unless the original application was designed that way.
  • Keep hands and body parts clear of hinges, brackets, pinch points and moving panels during removal and installation.
  • If the existing specifications cannot be positively identified, the replacement does not match, or you are unsure about safe removal or installation, stop and seek professional assistance.
Catalogue dimensions and availability can change. This finder uses the current working range established for Trailer Parts Direct and the specifications entered by the customer.
Gas Strut Replacement Finder hardware

700mm Gas Struts – Built Tough for Oversized Canopy Doors and Hatches
Dunn & Watson’s 700mm gas struts offer heavy-duty lift and stability for large doors in marine, 4WD, and industrial settings. Made from 316 stainless steel and tested to 50,000 cycles, these struts are built for long-haul reliability.

  • Skeleton Seal Prevents Pressure Loss
    Designed to maintain sealing integrity through frequent use and harsh exposure.

  • Nitrogen Gas for Long-Term Internal Protection
    99.9999% purity keeps moisture and oxygen from degrading internal parts.

  • More Oil, More Power
    Larger cylinder delivers better heat resistance and smoother operation.

For builds that demand serious support, the 700mm strut is ready to deliver.

Dunn & Watson Gas Struts Dimensions
Gas Strut 195mm - 316 Stainless Steel - 1

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Secret Link