48L Wheel Arch Water Tank (Australian Made)
AUSTRALIAN MADE FOR AUSTRALIAN CONDITIONS
$290.00 – $345.00
- Australian Roto-Moulded Plastic product
- White in colour
- Made with an extremely tough 5-8mm thick walling
- Optional Mounting Kit Available|
Please Note: Some holes may not align on tank mounting brackets due to ambient temperatures and tank cooling cycles when it’s removed from the oven. Additional holes may need to be drilled to align with pre-set threaded nutsert for install. Mounting plate is raw 3mm aluminium so drilling or elongating holes causes no harm to install.
Drilling extra holes or increasing the size of existing holes can cause the tank to leak. We recommend using only the holes pre-drilled in the tank for mounting.
Please Note: Water tanks may arrive with scratches. This is not a defect or from mishandling / transit damage. This is from wear in the water tank mould and the tanks also incur scratches when being pulled from the oven and out of their mould.
Please fill in the fields below with the shipping destination details in order to calculate the shipping cost.
Dunn & Watson 48 Litre automotive tanks Roto moulded to suit the profile of a wheel arch in the tub of a ute. These tanks make great use of what can otherwise be a waste of space in your tub. They are available in left or right hand orientation and made in Australia.
Drilling extra holes or increasing the size of existing holes can cause the tank to leak. We recommend using only the holes pre-drilled in the tank for mounting.
Please check the dimensions of the tank will fit with your vehicles wheel arch, as the tanks are a universal fit and not guaranteed to fit every vehicle.
SPECIFICATIONS
SKU: RVA48
GTIN: 9352016011367
Brand: Dunn & Watson Pty Ltd
Commonly used in: Camper Trailers, Caravans, Under Ute Trays
Product Weight: 7.1kg
Only logged in customers who have purchased this product may leave a review.
FAQs
Can I drink this water?
Yes these tanks are water potable, this means water from this tank is safe to drink.
Why is there flavour in my water?
You can search online for various methods to remove the plastic taste from your water.
Do these tanks have a baffle?
No.
Can I run a water level indicator in these tanks?
No.
The pilot holes for install are smaller than my mounting bolts, can I drill out holes to run larger fixings?
No. Increasing the hole diameter on the mounting flange can cause the tank to leak.
How tight do run fixings into tank mounting flange?
Fittings should be firm but it is important they aren't over tight and gauge or crack mounting flange. This may cause the tank to leak.
What are these tanks made from?
The material of these tanks is LLDPE (Linear Low Density Polyethylene). These tanks are Food Grade and BPA Free.
You may also like…
4WD Accessories
or 4 payments of $92.50 with Afterpay
4wd Cargo Drawers
Reviews
There are no reviews yet.